Международный журнал достижений в области технологий
Открытый доступ
ISSN: 0976-4860
ISSN: 0976-4860
Dean Vucinic Vesalius College, Vrije Universiteit Brussel, Belgium
Introduction
The certification procedure of transport airplanes flights under icing conditions requires the aerodynamic tests of (1) airplanes models in wind tunnels and (2) real airplanes flight test. The airplane ice accretion simulation aims to dimension and to shape the ice forming on the airplane surfaces based on the multiphase approach developed for ice accretion created on the airplane surfaces. The method is implemented in CFD software FlowVision, as the IceVision module, already in use by numerous companies and universities. The IceVision specificity, when compared to commonly used software tools simulating ice accretion, is based on the ice shape change calculated with the VOF technology for simulating the air and ice two-phases. This algorithm implies continuous ice growth considering simultaneously the external two-phase airflow, ice heating and contact surface motion applying automatic local remeshing. The implemented mathematical model is capable to simulate the formation of rime (dry) and glaze (wet) ice.
Conclusion
The IceVision module is validated on several ice accretion tests: (1) on cylinder in dry and wet conditions, (2) on airfoil NACA0012 in dry regime and (3) on 3-dimensional surface of the transport aircraft. For the first and second test, the numerical results are validated against experimental data and the comparison is done with other icing codes. For the third test, the performed analysis shows in details the formed ice shapes on the aircraft control surfaces.
Relevant Image: